GUIDE TO INSTALLATION AND OPERATION
XVP-3901 |
111
The
AES Channel Select
parameter selects which AES3 channel is the source of the Dolby Digital decoder if the
Dolby Digital data is configured in Professional 16-bit format. If the selected channel does not contain a valid Dolby
Digital bitstream, the channel data will be passed to the decoder output as a PCM signal.
The
Listening Mode
parameter selects the main channel output listening mode. It is active only for a Dolby Digital
input signal.
•
Full
is the standard mode.
•
Monitoring in
3 Stereo
mode reproduces only the left, right and center channels, the surround channels are
muted.
•
In
Phantom
mode, the center channel output is muted.
•
The
Stereo
mode will output only on the left and right channels, and the
Mono
mode only on center channel.
•
Refer to ANNEX 5 at the end of this document: Dolby Digital Main Channel Output Functions.
6.1.2 Dolby E tab
The
Dolby E
tab indicates status information for the selected Dolby-E bitstream.
The
Dolby E Common Status
section shows two values that are
common to all programs contained in the Dolby E bitstream:
Program
Configuration
and
Frame Rate
.
The
Decoder to Proc Channel Assignment
section gives the decoder
output mapping to the internal channels of the XVP-3901.
•
The
Main Output
sub-section shows channel assignments
related to the Program Configuration.
The
Prg 1
to
Prg 8
sub-tabs indicate Metadata information associated
with each Dolby-E program:
Coding Mode
,
Bitstream Mode
,
Dialnorm
(dialog normalization) value,
Line Mode Profile
,
RF Mode
Profile
,
Dolby Surround Mode
,
Surround EX Mode
and
Preferred
Stereo Downmix
. The number of programs depends on the Program
Configuration.
Figure 6.2 Dolby Decoder - Dolby E tab