manualshive.com logo in svg

Miranda DENSITE XVP-1801, Manual To Installation And Operation, Page: 54 / 65

Share
Download
Miranda DENSITE XVP-1801 Manual To Installation And Operation Download Page 54

GUIDE TO INSTALLATION AND OPERATION 
 

50

  |  XVP-1801 

A warning box will open allowing you to confirm the 
action, since it will result in changes to the 
configuration and there is no 

undo

 function. 

 
 
Copy to other cards 

Click this button to open a panel that allows the alarm 
configuration set for this card to be copied into another 
XVP-1801 card. 

•

 

Select one or more destination cards from the 
list in the window by clicking in the checkboxes, 
or all of them by clicking in the 

All 

checkbox 

•

 

Note that when you do a Copy Profile for this 
card (see Sect.3.5.13), the alarm configuration 
is copied along with all the other settings. 

  

 
 
 
 
 
 
 
 
 
Get alarm keys 

Click this button to open a save dialog where you can 
save a file containing a list of all alarms on this card 
and their current values, along with an Alarm Key for 
each. The alarm keys are useful for system integration 
and troubleshooting.  

•

 

The file is saved in Excel.csv format 

 
 
 
 
 
 
 
 
 
 

OK, Apply, Cancel 

•

 

OK

 accepts the settings and closes the window once the card confirms that there are no errors. 

•

 

Apply

 accepts the settings, but leaves the window open 

•

 

Cancel

 closes the window without applying any changes, and leaves the previous settings intact. 

 
 
 
 
 
 
 

 

Figure 3.40  

 Copy to other cards

 

Figure 3.41

   Get alarm keys save dialogue 

Summary of Contents for DENSITE XVP-1801


































































Reviews:

No comments