manualshive.com logo in svg

Miranda DENSITE XVP-1801, Manual To Installation And Operation, Page: 15 / 65

Share
Download
Miranda DENSITE XVP-1801 Manual To Installation And Operation Download Page 15

GUIDE TO INSTALLATION AND OPERATION 

XVP-1801  |  

11

  

•

 

Pushing the CONTROLLER button on the control panel selects the Controller card itself.  

•

 

The STATUS LED on the selected card flashes yellow. 

 
The local control panel displays a menu that can be navigated using the four pushbuttons located beneath 
the display. The functionality of the pushbuttons is as follows: 
 
[+]  [–] 

Used for menu navigation and value modification  

 
[SELECT]  Gives access to the next menu level. When a parameter value is shown, pushing this button 

once enables modification of the value using the [+] and [–] buttons; a second push confirms the 
new value 

 
[ESC] 

Cancels the effect of parameter value changes that have not been confirmed; pushing [ESC] 
causes the parameter to revert to its former value. 

 
 

Pushing [ESC] moves the user back up to the previous menu level. At the main menu, [ESC] 
does 

not

 exit the menu system. To exit, re-push the [SELECT] button for the card being 

controlled. 

 
If no controls are operated for 30 seconds, the controller reverts to its normal standby status, and the 
selected card’s STATUS LED reverts to its normal operating mode. 
 

3.3.2  Menu for local control 

 
The XVP-1801 has operating parameters which may be adjusted locally at the controller card interface.  

•

 

Press the SELECT button on the XVP-1801 front card edge to assign the Densité frame’s local 
control panel to the XVP-1801 

•

 

Use the keys on the local control panel to step through the displayed menu to configure and adjust 
the XVP-1801.  

 
The complete menu structure is shown in Annex 1 to this document, beginning on page 56. 
 
 

3.4  Remote Control Using the RCP-100 

 
The XVP-1801 can be controlled through a menu accessible using Miranda’s RCP-100 remote control panel. 
 
Please refer to the RCP-100 Guide to Installation and Operation for detailed instructions on installing and 
operating the RCP-100, and for instructions on how to connect the RCP-100 to the XVP-1801 (or any other 
supported card) so that the menu can be accessed.  
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for DENSITE XVP-1801


































































Reviews:

No comments