manualshive.com logo in svg

Miranda DENSITE XVP-1801, Manual To Installation And Operation, Page: 23 / 65

Share
Download
Miranda DENSITE XVP-1801 Manual To Installation And Operation Download Page 23

GUIDE TO INSTALLATION AND OPERATION 

XVP-1801  |  

19

  

 

Freeze 

tab 

Freeze type

:

 

This is a pull-down menu with four 

options – FIELD 1, FIELD 2, FRAME and BLACK. 
It determines the manner in which the XVP-1801 
responds to a manual freeze, a video input switch 
(“hotswitch” as defined by SMPTE recommended 
practice RP-168, revised January 2002), a loss of 
input signal or other input errors. The four possible 
options yield the following results: 
 
 

 

Freeze Option 

Auto Mode 

Manual Mode 

•

 Field 

1 

 

Freeze to last valid FIELD 

Freeze to last valid FIELD 1 

•

 Field 

2 

Freeze to last valid FIELD 2 

•

 Frame 

Freeze to last valid FRAME 

•

 Black 

Freeze to BLACK 

 
Auto Freeze:  

This pulldown (ON/OFF) enables or disables the auto freeze function. In Auto Freeze mode, a 

reference must be present to ensure a glitchless output when a freeze is activated. There are only two freeze 
possibilities in Auto mode: freeze to last valid Field or freeze to black. When Auto Freeze mode is disabled, 
the content of the active picture will reflect whatever garbage is present at the input but, if a reference is 
present, the output synchronization will be maintained to avoid unlocking downstream equipment. 
 

Manual:

  Select this checkbox to immediately freeze the output according to the mode selected in the Freeze 

Type pull-down.  
 

Note: 

The manual freeze setting is saved in the non-volatile memory of the card. If the manual freeze is 

activated and the power is cycled, the card will start in freeze mode at the next power-up and the output will 
be invalid. Just turn off the manual freeze to restore the output. 
 
In all cases, audio will be muted when there is an input error. See audio section for more information. 

 

Figure 3.5   

Input group – Freeze tab

 

Summary of Contents for DENSITE XVP-1801


































































Reviews:

No comments