GUIDE TO INSTALLATION AND OPERATION
42
| XVP-1801
3.5.10 The
Thumbnail
group
The thumbnail area displays thumbnail images for
the inputs and outputs selected in the Player area.
Player – Click the checkbox to display the
thumbnail
Control – Click the checkboxes to apply the Mode,
Format, Quality and Refresh Rate settings to the
these thumbnails.
Mode
– select between Video mode and Test
mode. Use Video mode for normal operation.
Format
– choose the thumbnail size: small,
medium, large
Quality
– choose the quality of the displayed
image by selecting Poor, Normal or HiQ from the
pulldown list
Refresh Rate
– select the desired refresh rate
from the pull-down box. The choices are:
[Fast, 1 sec, 2 sec, …, 9 sec, 10 sec.]
Streaming Priority Control
– Click the
Take control from Slot [##]
checkbox to force the Densité Controller for
this frame to assign more bandwidth for this card’s streaming output. Only one card in the frame can use this
feature. It has no effect unless you have selected
Fast
for the refresh rate. The actual slot number of this
card, as shown in the window title bar, will appear when the checkbox is ticked.
•
This feature is only available with the version 1 of the Densité Controller
3.5.11 The
RALM
group
The Remote Audio Level Meter (RALM) panel
displays audio level meters for up to 8 channels.
Channels are displayed in pairs, so up to four
meters will be present in the meter display window
The source for each meter is selected using the
pulldowns in the RALM Remote Control area at the
bottom of the control panel.
•
Choices are OFF, Embedded CH 1&2, and
each pair up to CH 15&16, AES1 to AES 4
The meter is divided into three zones, and the
dividing points and color of each zone are
individually configurable under the
Meter Ballistics
Config
tab.
Speed
–
select the meter response from the pull-
down list, options are [ fast, medium, slow ]
Figure 3.29
Thumbnail group
Figure 3.30
RALM group – RALM Connections tab