10
Operating basics
Turning the recorder ON and OFF
Complete the installation according to the instructions in the “Using your recorder in a
vehicle” section.
Once the vehicle engine is started, the recorder automatically turns on. By default, the
recording will automatically start in few seconds after start-up.
When a GPS fix is established, the GPS signal icon (
) will show on the top-right
corner of the screen*. The number of the vertical bars in the icon indicates the strength
of the signal.
* For selected models only.
When the recorder is turned on, press and release the Power key to switch the LCD
screen on/off.
To manually turn the recorder on and off, press and hold the Power key for 2 seconds.
Restarting the recorder
Occasionally, you may need to perform a hardware reset when the recorder stops
responding; or appears to be “frozen” or unresponsive.
To restart the recorder, press and hold the Power key until the system is shut down; press the
Power key again to turn the recorder on.
Setting the date and time
To make sure of the correct date and time for your recordings, please check the date and
time settings before you begin recording.
1. Press
to access the Settings Menu.
2. Select
System > Date / Time
and press
.
Summary of Contents for MiVue 5 series
Page 1: ...User Manual Series ...
