Minolta DiMAGE S404, Instruction Manual

Page: 8 / 29

Using your thumb and
index finger, pinch the
outside tabs of the
lens cap to remove or attach.
• When the camera is not in use, always replace the
lens cap.
14 15
N
AMES OF PARTS
Attach the camera strap to the strap eye-
lets as shown.
• Make sure the neck strap passes through
the loop of the lens-cap strap.
• Always keep the camera strap around your
neck in the event that you drop the camera.
Attach the small strap to the lens cap by passing one of the
small loops through the eyelet on the cap (1) and then pass-
ing the other loop through the first loop (2) and tightening.
1
2
ATTACHING THE NECK STRAP AND LENS CAP
GETTING UP AND RUNNING
4
3
LCD MONITOR DISPLAY
b. Flash-mode indicator (p. 30)
d. Contrast-compensation display (p. 60)
e. Color-saturation-compensation
display (p. 60)
f. Exposure-compensation display (p. 46)
g. White-balance indicator (p. 54)
m. Camera-sensitivity (ISO) display (p. 57)
j. Metering-mode indicator (p. 58)
l. Camera-shake warning (p. 31)
i. Shutter-speed display
k. Aperture display
n. Manual-focus indicator (p. 56)
r. Macro indicator (p. 28)
q. Drive-mode indicator (p. 32)
o. Focus signal (p. 25)
p. Frame counter (p. 42)
v. Digital-zoom display (p. 22)
u. Image-size display (p. 40)
t. Image-quality indicator (p. 41)
s. Battery-condition indicator (p. 17)
a. Mode indicator (p. 12)
1. Focus frame (p. 48)
2. Spot metering area (p. 58)
3. AF sensors (p. 23)
h. Exposure-mode (p. 52)/
Digital-subject-program indicators (p. 28)
c. Sharpness display (p. 60)