Minolta DI1610F, User Manual

Page: 108 / 260

6.1 Transmission Methods 6
Di1610f 6-3
F
a
x
T
rans
mi
ss
io
n/Re
ce
pti
on M
e
th
ods
Ch
apt
er
6
5
Press the [Memory TX] key, and
then check that the Memory TX
lamp lights up.
✎
Note
If the Memory TX lamp is not
lit, the manual transmission is
selected.
6
Press the [Start] key to begin scanning and sending the fax.
❍ To stop the transmission, press the [Stop] key.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed (p. 7-74).
Manual Transmission
If the machine is connected to a telephone and the same line is used for phoning
and faxing, the document can simply be sent after talking with the recipient over the
phone.
This is useful, for example, if you wish to tell the recipient that you are sending a fax.
✎
Note
If the recipient’s fax machine is set to receive faxes automatically (automatic
reception), a beep is sounded without the recipient answering the phone;
however, at that time, the telephone cannot be used for talking.
If the fax is to be sent after talking on the telephone, use the Automatic
Document Feeder.
Manual transmission is possible if a telephone (either purchased or rented) is
connected to the TEL port of this machine.
✎
Tip
Even when pulse dialing is being used, entering “ ” produces signals for tone
dialing.