65
Settings Section
2. Setting/changing the target color by entering values
This method can be used for memory channel CH00 only.
[Operating Procedure]
1
4
2
3
When the optional 4-point expansion board CA-B04 is used
Select the probe no. to which you want to set the target color. The target color can be set independently for each
probe connector ([P1] to [P5]) for each memory channel.
1
1
1
1
1
Press the
key.
The LCD display section will switch to the menu selec-
tion screen.
2
2
2
2
2
Press the
key to open the PROBE selec-
tion screen.
Each time the
key is pressed, the screen will switch
in the order PROBE
→
SYNC
→
ID Name input
→
RANGE
→
Measurement Speed
→
Number of Digits
→
Calibration Standard
→
RS232C Baud Rate
→
PROBE.
3
3
3
3
3
Press the
key to display the probe no.
you want to select.
Each time the
key is pressed, the probe no. switches in the order [P1] ….
4
4
4
4
4
Press the
key to confirm the selection.
* By default (factory setting), the instrument is set so that [P1] will be selected automatically when the POWER switch is set to ON. If you
want to change this setting, refer to page 29.
1
.
Press the MEMORY CH
and
keys
until the memory channel CH00 appears.
2
.
Press the
key.
In the LCD display section, the current target color val-
ues are displayed.
<Error Messages in LCD Display Section>
… For other error messages, refer to page 101.
●
“E3” (after the
key is pressed)
•
Cause : An attempt was made to set Incorrect target
color values.
Incorrect calibration values mean the following.
1
One of x, y and Lv is “0”.
2
1 – x – y 0
3
Values which are beyond the instrument’s calculation capability or contradicting values.
•
Action : Enter correct values and then press the
key.
Menu selection screen
PROBE selection screen
Probe no.
Press the
key
until the desired
probe no. appears.
MENU : SELECT
PUSH SPACE KEY
SELECT : PROBE
P1 35881112
SELECT : PROBE
P3 35881113
E3
x
y
Lv P1
0000 3293 160.0
_
Memory channel
CH00 EXT Ad P1
[ ]
CH00 x y Lv P1
3127 3293 160.0
_
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for CA-100PLUS -
Page 25: ...22 Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
Page 47: ...44 Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
Page 101: ...98 Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
Page 124: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com...
