CONTROLLING SPEED & STEERING WITH THE FOOT PEDAL
The foot pedal is used to operate the motor, and controls on the foot pedal are easy to operate by either foot or hand. The motor
can also be controlled by an i-Pilot or i-Pilot Link remote, as well as any compatible Minn Kota remote. Please refer to the i-Pilot,
i-Pilot Link or compatible remote manual on how the remote controls the motor.
Power
The Power Switch is located on the left hand side of the foot
pedal and used to turn the power on and off. The blue light next
to the Power icon on the Indicator Panel is illuminated when the
power is on. Do not try to steer this motor with the foot pedal
when it has lost power.
Motor Speed
The Speed Knob is located on the top right side of the Toe End of the foot pedal. Turn the Speed Knob clockwise to increase
speed and counter-clockwise to decrease speed. Speed can also be adjusted using the remote.
Momentary Motor Operation
In Momentary Motor Operation, the propeller will only run while downward force is applied to the Momentary On Button. The
Momentary On Button is located on the top left Toe End of the foot pedal. Applying downward pressure to the Momentary On
Button will turn the propeller on. The motor will then run at the speed set by the Speed Knob. Removing downward force to the
Momentary On Button will turn the propeller off. No indicator light is associated with the Momentary On Button.
Constant Motor Operation
To switch to Constant Motor Operation, press the Constant On Button. The Constant On Button is located on the bottom
left Heel End of the foot pedal and is labeled on the foot pedal with a propeller symbol. In Constant mode, the propeller will
continually run, regardless of whether or not force is being applied to the Momentary On Button. While in Constant Motor
Operation, the propeller will run continuously at the speed set by the Speed Knob, or by the i-Pilot or i-Pilot Link remote. The
green light next to the Constant On icon on the Indicator Panel will be lit when the motor is in Constant Motor Operation.
Spot-Lock
Constant On Button
Indicator Panel
Power Switch
Momentary On Button
Toe End
Heel End
Speed Knob
AutoPilot
NOTE:
Remember to turn the power off when the
motor is not in use to prevent the motor from draining
the battery.
Indicator Panel
Spot-Lock
Constant On
Power
AutoPilot
