MOUNT FEATURES
Become familiar with the features of the motor to maximize the capabilities this product offers.
Motor Mount
The Motor Mount is designed to securely hold the motor in place on the deck of the boat. It functions to stow and lock the motor
flat on the deck when not in use by providing secure stowage for transport. The motor mount also positions the motor when it is
in the deployed position.
Pull Grip and Cable
The Pull Grip and Cable releases the lock bar on the motor
mount, which automatically engages when the unit is stowed
or deployed into position. The Pull Grip and Cable should be
used to assist when both stowing and deploying the unit.
Inspect the Pull Grip and Cable during each use and replace
when it shows signs of wear.
Motor Rest and Yoke
The Motor Rest positions the lower unit as it comes into contact with the nose of the mount and guides it onto the motor mount.
The Yoke sits in the middle of the motor rest and captures the motor shaft. The yoke keeps the lower unit centered on the motor
rest when in the stowed position.
Hold-Down Strap
The Hold-Down Strap must be used to place pressure on the motor shaft to hold the lower unit tightly against the motor rest
when stowed. The Hold-Down Strap runs under the Mount and is properly secured when the motor shaft is secured on the
Mount Rest and the strap is secured to itself. The Hold-Down Strap should be secured every time the motor is stowed to prevent
damage from high wind, rough water or vibrations, including while the boat is trailered.
WARNING
When stowing or deploying the motor, keep fingers clear of all
hinges, pivot points and all moving parts. Always use the Pull Grip
and Cable to stow and deploy the motor to prevent injury.
Motor Rest
Mount Ramp
Motor Shaft
Lower Unit
Pull Grip and Cable
Hold-Down Strap
Motor Mount
Yoke
