![background image](http://html1.mh-extra.com/html/minn-kota/endura-max-engine-mount-160/endura-max-engine-mount-160_owners-manual_1802769033.webp)
minnkotamotors.com | 33
©2018 Johnson Outdoors Marine Electronics, Inc.
PaRTs DIaGRam & PaRTs lIsT
FCC COMPLIANCE
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be received, including interference that may cause undesired operation.
Changes or modifi cations not expressly approved by Johnson Outdoors Marine Electronics, Inc. could void the user’s authority to
operate this equipment.
INDUSTRY CANADA COMPLIANCE
This product meets the applicable Industry Canada technical specifi cations. Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Changes or modifi cations not expressly approved by Johnson Outdoors Marine Electronics, Inc. could void the user’s authority to
operate this equipment.
NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Rev J
11/18
ECN 39370
Part #2384940
Engine Mount Parts Diagram
ENGINE MOUNT
24 VOLT
The parts diagram and parts list provides Minn Kota® WEEE compliance disassembly instructions. For more information about where
you should dispose of your waste equipment for recycling and recovery and/or your European Union member state requirements, please
contact your dealer or distributor from which your product was purchased. Tools required, but not limited to: fl at head screwdriver,
Phillips screwdriver, socket set, pliers, wire cutters.
ENGINE MOUNT MOTOR
86
82
62
60
64
58
94
90
106
38
32
8
20
22
18
36
40
42
12
2
6
34
24
10
4
54
56
98
96
92
108
66
74
C
80
70
66
76
68
78
96
102
100
106
104
A
98
108
92
94
90
F
D
E
120
34
50
46
48
52
10
34
54
56
4
2
24
6
36
22
20
18
42
40
12
8
16 14
32
38
44
28
28
28
28
62
118
64
64
64
44
16
16 14 16
16
34
32
34
G