![background image](http://html1.mh-extra.com/html/minn-kota/endura-max-engine-mount-160/endura-max-engine-mount-160_owners-manual_1802769022.webp)
22 | minnkotamotors.com
©2018 Johnson Outdoors Marine Electronics, Inc.
CONNECTING THE BATTERIES
CONNECTING THE BATTERIES
12 Volt Systems
1. Make sure that the motor is switched off (speed selector on “OFF” or “0”).
2. Connect positive ( + ) red lead to positive ( + ) battery terminal.
3. Connect negative ( – ) black lead to negative ( – ) battery terminal.
WARNING
For safety reasons do not switch the motor on until the propeller is in the water. If installing a leadwire plug, observe proper polarity
and follow instructions in your boat owner’s manual.
WARNING
•
For safety reasons, disconnect the motor from the battery or batteries when the motor is not in use or while the battery/batteries
are being charged.
•
Improper wiring of 24/36 volt systems could cause battery explosion.
•
Keep leadwire wing nut connections tight and solid to battery terminals.
•
Locate battery in a ventilated compartment.