minnkotamotors.com | 17
©2018 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE CONTROL MODULE AND CONNECTING IT TO THE MOTOR
i. Take the second Positive (+) Lead Wire (violet) from
the Control Module and slip a Heat Shrink (Item
#10) over it. Connect the Positive (+) Lead Wire
(violet) from the Control Module to the Positive (+)
Lead Wire (violet) from the second motor.
j. Slip a Heat Shrink over the second Negative (-)
Lead Wire (gray) from the Control Module. Connect
the Negative (-) Lead Wire (gray) from the Control
Module to the Negative (-) Lead Wire (gray) from the
second motor.
4
Shrink Tube
Shrink Tube
Positive (+) Lead Wire
from Control Module
(violet)
Negative (-)
Lead Wire from
Control Module (gray)
Positive (+)
Lead Wire
from Motor
(violet)
Negative (-)
Lead Wire from
Motor (gray)
4i
Shrink Tube
Positive (+) Lead Wire
from Control Module
(violet)
Positive (+)
Lead Wire
from Motor
(violet)
Shrink Tube
Negative (-)
Lead Wire from
Control Module (gray)
Negative (-)
Lead Wire from
Motor (gray)
ITEM(S) NEEDED
#10 x 2
Set 2
Set 2
4i
Positive (+)
Lead Wire from
Motor (violet)
Negative (-)
Lead Wire from
Motor (gray)
Negative (-)
Lead Wire from
Control Module
(gray)
Positive (+) Lead
Wire from Control
Module (violet)
Set 2
Shrink Tube
4j