12 | minnkotamotors.com
©2018 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE ENGINE MOUNT
3
ITEM(S) NEEDED
#2 x 6
#6 x 6
e. Route the Cable from the Engine Mount into the boat
through a cable port or any other available opening.
It is recommended to use any existing Cable Hooks if
they are present.
f. On some boats, it may be necessary to add a Cable
Port through the Transom. If necessary, consult your
marine dealer for appropriate hardware.
g. Place one 3/8" Washer (Item #6) on the end of each
of the six 3/8”-16 x 1-1/4" Hex Head Cap Screw
(Item #2). Put one Screw in each of the Mounting
Holes so that they first pass through the Mounting
Bracket, then the Insulator Pad and then the
Anti-ventilation Plate.
Anti-ventilation
Plate
Cable Hook
Washer
Screw
Anti-ventilation
Plate
Insulator
Pad
Mounting Bracket
3e
3g
