background image

2  |  minnkotamotors.com

©2018 Johnson Outdoors Marine Electronics, Inc.

INTRODUCTION

Made by Minn Kota  

Johnson Outdoors

Marine Electronics, Inc.

121 Power Drive

Mankato, MN 56001 USA

Outboard Motors

Produced in 2015

Engine Mount 

MODEL 1370610

SER NO S365 MK12345

EXAMPLE

NOTICE:

 

The serial number on your Engine Mount is 

located underneath the bracket.

THANK YOU

Thank you for choosing Minn Kota. We believe that you should spend more time fishing and less time positioning your boat. That’s why 
we build the smartest, toughest, most intuitive trolling motors on the water. Every aspect of a Minn Kota trolling motor is thought out 
and rethought until it’s good enough to bear our name. Countless hours of research and testing provide you the Minn Kota advantage 
that can truly take you “Anywhere. Anytime.” We don’t believe in shortcuts. We are Minn Kota. And we are never done helping you 
catch more fish. 

Model Serial Number: _____________________________________________________________________________________________________

Controller Serial Number: _________________________________________________________________________________________________

Purchase Date: __________________________________________________________________________________________________________

Store Where Purchased: ___________________________________________________________________________________________________

REGISTRATION

Remember to keep your receipt and immediately register 
your trolling motor. A registration card is included with your 
motor or you can complete registration on our website at 

minnkotamotors.com

.

SERIAL NUMBER

Your Minn Kota 11-character serial number is very important. It 
helps to determine the specific model and year of manufacture. 
When contacting Consumer Service or registering your product, 
you will need to know your product’s serial number. We 
recommend that you write the serial number down so that you 
have it available for future reference.

NOTICE: 

Do not return your Minn Kota product to your retailer. Your retailer is not authorized to repair or replace this unit. You 

may obtain service by: calling Minn Kota at (800) 227-6433; returning your product to the Minn Kota Factory Service Center; 
sending or taking your product to any Minn Kota authorized service center. A list of authorized service centers is available on our 
website, at 

minnkotamotors.com

. Please include proof of purchase, serial number and purchase date for warranty service with any 

of the above options.

MOTOR INFORMATION 

(For Consumer Reference Only)

Summary of Contents for ENDURA MAX Engine Mount 160





































Reviews: