6 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
MAXXUM AND RIPTIDE MAXXUM INSTALLATION
a. Note how the rope is routed through the Rope
Guide, around the Pins, and into the Eye Shaft. The
new cable will be routed in the same manner.
b. Remove the current rope.
c. Taking the new Cable and Handle (Item B) and
feed the Cable End Stop down through Rope Guide
Eyelet, and around the Lower Arm Pin.
d. Attach the Clevis (Item #8) onto the Cable by
sliding the clevis slot over the Cable and sliding the
Cable End Stop into the Clevis.
e. Attach the Clevis to the Eye shaft using the Clevis
Pin and Retaining Ring (Item #10).
Rope Guide
Eyelet
Eye Shaft
Lower Arm
Pin
Eye Shaft
Clevis Pin and
Retaining Ring
Cable
Clevis
ITEM(S) NEEDED
B x 1
ITEM(S) NEEDED
#10 x 1
#8 x 1
1
2
Lower Arm
Pin
Cable End
Stop
