4 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
e. Pull on the Cable Handle until the Clevis slides into
the opening between the Latch Bar and Latch/Strap
Rope Pull Bracket.
Latch Bar
Latch/Strap
Rope Pull
Bracket
Clevis
Pin
a. To reassemble the Bowguard/Steering Module, start
with the mount in the deployed position.
b. Align the Keyways on the inside of the Bowguard/
Steering Module with the End Links on the mount.
Do this by positioning the Bowguard/Steering
Module above the End Links on the mount.
c. Lower the Bowguard/Steering Module straight down
until seated.
End Links
Keyways
Clevis
Cable
d. Attach the Clevis (Item #8) onto the Cable by
sliding the clevis slot over the cable and sliding the
Cable End Stop into the Clevis. Install the Clevis
Pin and Retaining Ring (Item #10). The Clevis Pin
must be installed to prevent the Cable from coming
out of the Clevis.
Clevis Pin
and Retaining
Ring
ITEM(S) NEEDED
#10 x 1
#8 x 1
Reassemble the Bowguard/Steering Module
1
2
3
Cable End
Stop
Rope
Guide
