3 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
b. Remove the 5/16" Allen Screw with a 1/4" Allen
Wrench. The 5/16" Allen Screw is located on the
opposite end of the mount from the hinge that
opens and closes when the mount is stowed and
deployed.
c. Once the Allen Screw and Lock Washer are
removed, lift the Bowguard/Steering Module straight
up until it is free from the mount.
Allen Screw with Lock Washer
a. Once the Bowguard/Steering Module is removed
note how the rope is routed through the mount,
Rope Guide, around the Pin, and into Latch/Strap
Rope Pull Bracket. The new cable will be routed in
the same manner.
b. Remove the current rope.
c. Taking the new Cable and Handle (Item B), feed
the new Cable End Stop down through the top Rope
Guide hole, around the Lower Pin, and feed the
Cable through the Latch/Strap Rope Pull Bracket.
Pull the Cable through and out one of the cutout
windows in the aluminum arm. This will allow room
to attach the Clevis.
Rope
Guide
Cable
Aluminum
Arm
Cable End
Stop
ITEM(S) NEEDED
B x 1
Latch/Strap
Rope Pull
Bracket
Latch/Strap
Rope Pull
Bracket
Cable and Handle Installation
2
1
