AN-48-003 Rev. H (Jun 09, 2022) This document and its contents are the property of Mini-Circuits ECO-013719 Page 22 of 44
3.2
Ethernet Interface (RC suffix models only)
3.2.1
After starting the GUI (section 3.1) you
can select the control method you
wish to use for the PWR, either USB or Ethernet control. All models support USB control,
only models with the RC suffix (such as PWR-8GHS-RC) support Ethernet control. To start
operation with USB see
section 3.1
. For Ethernet control either type the IP address and port
of the power sensor, or click on the search icon.
3.2.2
After clicking on the search icon,
the IP search will pop up with a list of
smart power meter IP addresses found and their HTTP ports on the left side of the screen,
and full details of each unit on the right. Mark the IP address you wish to use and click
select. The search window will close, and the IP address and port will be entered in the IP
address field of the initial screen automatically.
Figure 3.2.2:
Ethernet IP search window
Figure 3.2.1:
Power Sensor Startup screen
