AN-48-003 Rev. H (Jun 09, 2022) This document and its contents are the property of Mini-Circuits ECO-013719 Page 10 of 44
2
Chapter 2 – Installation and Setup
System requirements for the PWR models are a computer (Pentium II or better) with support for
USB HID. To run the GUI program a Windows operating system for either 32 or 64 bits is also
required.
The RC models can also be operated remotely over a network with mains power (100-220V)
supplied using the included power adaptor.
2.1
Software Setup
If you have had any problems installing the software, we’re here to help.
Try following these complete step-by-step instructions. If you still experience problems,
give us a call at Mini-Circuits Worldwide Technical support. It’s (718) 934-4500 or e-mail
[email protected] for North America, or go to minicircuits.com/contact/worldwide_
tech_support.html for other regional numbers and addresses.
2.1.1
First
save all work in progress and close any other programs that may be running.
2.1.2
Next,
download the full Software Package from
https://www.minicircuits.com/softwaredownload/PowerMeter_CD.zip
Unzip the downloaded files to a suitable folder on your computer, then open the file folder you
created and double-click the “Install” icon.
Figure 2.1.2
Software Package
file listing window
