AN-48-003 Rev. H (Jun 09, 2022) This document and its contents are the property of Mini-Circuits ECO-013719 Page 34 of 44
3.8.5
A browse window will open to the firmware directory
under the path
you selected when installing the GUI program (See
Fig. 3.8.5
). Navigate to where you saved
your firmware file, select the firmware version you wish to install and proceed.
Figure 3.8.5:
Firmware - Browse
Window (Right – PWR-40PW-RC, Left – rest of models)
3.8.6
The selected file will be installed in the power sensor.
The process will
take up to a minute
.
Figure 3.8.6:
Firmware - Progress Bar Window (Right – PWR-40PW-RC, Left – rest of models)
3.8.7
After the firmware has updated
an alert will appear. Click ‘OK’ to shut down
the smart power meter program and then restart it normally.
Figure 3.8.7:
Firmware - Successful Update (Right – PWR-40PW-RC, Left – rest of models)
