AN-48-003 Rev. H (Jun 09, 2022) This document and its contents are the property of Mini-Circuits ECO-013719 Page 19 of 44
3.1.6
After acknowledging the alert,
the main measurement screen will appear with
no unit selected and a ‘Not Connected’ notice. Click on ‘reset connection’ to try connecting
again, or close the program.
3.1.7
If there's a faulty DUT connection,
no RF power or the power is below the
sensors dynamic range a ‘Power Too Low’ notice will appear.
Figure 3.1.6:
No USB Unit found
Figure 3.1.7:
Power too low
