AN-48-003 Rev. H (Jun 09, 2022) This document and its contents are the property of Mini-Circuits ECO-013719 Page 20 of 44
3.1.8
The Ethernet Configuration (RC suffix only) screen can
only be
accessed from the USB control main screen. Click on the Ethernet-Config button in the
bottom right corner of the screen, and the Ethernet configuration screen will appear.
Figure 3.1.8
Ethernet-Config button on USB main screen
3.1.9
The Ethernet Configuration screen will
open showing the current
configuration.
Figure 3.1.9
shows the factory default of the power sensor. If these settings fit
your local network, you do not need to access the setup before connecting the power sensor
to the network.
Figure 3.1.9:
Ethernet Config. screen (showing factory default state)
Note:
If you are using a proxy server for your LAN connections you may need to define a name
for the power sensor IP address, or disable the proxy server to connect to the power sensor via
Ethernet.
9
8
4
2
6
11
1
3
5
7
10
12
