User’s Guide
13
II. IP-CAM Network Framework Installation 2
Way to access Internet
Use Permanent ADSL or Cable Modem
Physical IP Address
Owns one physical IP address
IP Share or LAN Hub
Must be equipped with DHCP & NAT function
Network Setup for IP -CAM
LAN Enable / Manually Web Server Port Number, need to be adjusted
Suitable Objects
Users with one physical fixed IP addresses, IP Share and several IP-
CAMs installed
1. Set a real physical IP address (e.g., 211.78.174.01) for the public IP of IP Share. Then, set another private IP
address and activate the DHCP server function of IP Share.
2. In the IP configuration for each IP-Cam, please assign different virtual IP address internally and respectively. In
the Http Port setting, please specify different port parameters. (Please refer to 2.6 Installation for IP Share)
3.For the port transformation in IP Share, please refer to IP and port settings of camera to configure accordingly.
4. For viewing images in IP-Cam from remote computer: Open IP browser and type in the physical IP address of the
IP Share and the port number of IP-Cam, e.g., http:// 211.78.174.01:1025.
