User’s Guide
7
Step 1.
Display cuurent available IP-CAM list.
Step 2.
Click MP4_IPCam to connect IE
automatically. Type the username
and password for browsing IP-CAM
screen.
(Default=> username:admin)
password: password
2.2 USE IP-CAM AND TEST THE IMAGE FUNCTION FOR THE FIRST TIME
T
he following connection is suitable for IP-CAM test / DHCP& fixed IP&PPPoE setting / program code upgrade
(strongly recommended):
The operation steps are listed below:
Installing the Product for the first time :
•You computer must be equipped with network card and RJ-45 network connector.
•Connect the RJ-45 terminator on the rear of IP-Cam to the red test network cable. One end is connected to the
network card of computer; the other end is connected to the rear side of
the IP- Cam.
•Connect the power adaptor to the power port (on the rear) of IP-Cam.
Now, the status LED on the top of IP-Cam will light up.
•Install Serach Tool (the program must be intalled into any PC which will
be used to view IP-CAM image). The default setting for connection is
that DHCP Client can use the built-in IP Address (based on the card of
client) of the network card directly and configure with the same subnet
automatically.
(Figure1)
(Figure 2)
※
Note: For IP-CAM must connect with PC directly to obtain the default IP address of network card for configuring
IP-CAM address, it will take more time (about one minute) to search. If IP-
CAM list is not shown after one minute, please press "Rescan" to search
again or make sure if the bottom right corner appears network connection
status (stop searching with symbol "!")as shown below. If yes, please press
“Rescan” to search again.
※
Note: If PC and IP-CAM in LAN connect
through IP-Hub or Wireless IP switch, it will take
30 seconds to locate because PC and IP-CAM
are in the same subnet which will save more
time of searching.
※
Note: For search correct IP address, the connection type for PC network must be DHCP.
※
Note :If you can not see video , please download flash player 9 from web-site:http://www.adobe.com/products/
flashplayer/
