2
Motors are chosen according to the following table:
* Control panel S359 600038/V810 or S359 600050/V820 it is possible to order for setting the stop motor, however, it is
not included in supply of the stopmotor and it has to be ordered separately.
Above mentioned stop motors were tested in the machine and they meet functional requirements. Other types
of stop motors can have but need not have suitable parameters. Producer does not recommend using the other
stopmotor without testing.
2.4 Motor pulley
By stopmotor EFKA DC 1600/DA82GA is revolutions are set continuously by electronics.
The diameter of the motor pulley in mm must be by asynchronous motors according to the following quotation:
Diameter of pulley = 71 x sewing speed (st/min)
motor revolutions (rev./min)
The smallest diameter of pulley is 42 mm considering used V-belt. Belt cover on the motor limits the biggest diameter
of pulley to 127 mm.
The pulley for the maximum or other sewing speed will be supplied on express wish of the customer.
Motor pulley diameter
Sewing speed of machines: standard
1)
Mains voltage frequency: 50 Hz
1)
When the customer will not order anything else, he will get a pulley for standard sewing speed. Owing to a limited
assortment of pulleys, the effective sewing speed may slightly differ from that declared and quoted in the column.
2
)
The table gives effective pulley diameter which is by 4 to 5 mm lower than the outer diameter.
Note.: The effective diameter of the hand wheel pulley is 71 mm.
Machine
Ordered
Name
Diameter
Machine rev. Approx. specification
subclass
number
of pulley
max./min
50 Hz/60 Hz
X11
S359 600030 63 FIR 1148
63
2500/3000 asynchronous clutch motor; switch-circuit breaker
X21
S359 600030 50 3 x 400/230 V,
50
2000/2400 with cabling; connection material
S359 600030 42 2800 RPM, 50 Hz
42
1600/2000
S359 600031 75 FIR 1147F
75
1500/1800 asynchronous clutch motor; switch-circuit breaker
S359 600031 63 3 x 400/230 V,
63
1200/1500 with cabling; connection material
S359 600031 42 1400 RPM, 50 Hz
42
800/1000
X12
S359 600045 810 Stopmotor EFKA
58
adjustable DC motor (AC servo) control panel V810;
X22
DC 1600/DA82GA
mains switch with cabling; connection material
X4X
1 x 230 V, 50/60 Hz
X5X
S359 600045 820
58
adjustable DC motor (AC servo) control panel V820;
mains switch with cabling; connection material
S359 600052 63 Stopmotor EFKA *
63
2500/3000 asynchronous stopmotor with friction clutch and
S359 600052 50 VD 552/6F82FA
50
2000/2400 brake; switch-circuit breaker; connection material
S359 600052 42 3 x 400/230 V,
42
1600/2000
2800 RPM, 50/60 Hz
S359 600056 75 Stopmotor EFKA *
75
1500/1800 asynchronous stopmotor with friction clutch and
S359 600056 63 VD 554/6F82FA
63
1200/1500 brake; switch-circuit breaker; connection material
S359 600056 42 3 x 400/230 V,
42
800/1000
1400 RPM, 50/60 Hz
Ordered number/motor pulley diameter
2)
Model
Sewing
EFKA DC 1600/
EFKA VD 552/
FIR 1148/552/3
EFKA VD 554/
FIR 1147F/554/3
speed
DA82GA 3312
6F82FA
6F82FA
(SPM)
4000 RPM
2800 RPM
2800 RPM
1400 RPM
1400 RPM
4182-1XX-100 2500
S359 600052 63/
ø
63 S359 600030 63/
ø
63
-
-
-200 2500
S359 600045 810/
ø
58
-300 1600
S359 600045 820/
ø
58 S359 600052 42/
ø
42 S359 600030 42/
ø
42 S359 600056 75/
ø
75 S359 600031 75/
ø
75
Summary of Contents for 4182i 100 Series
Page 38: ...14 ...
