10
4.7.3 Fastening upper cover belt, position reader,
control panel of stopmotor and thread stand
- Screw the stop to the belt guard.
- Assemble upper cover belt and hand wheel according to
par.4.5.
- Set the position reader (3) on the handwheel pin so as to
match the stop groove of the position reader with the stop
(thus immobilizing the position reader).
- Fix the position reader by retightening the two hexagonal
screws.
- Fix the control panel of stopmotor:
- Stick the panel V 810 (1) by stopmotor EFKA on the machine
head (if any). Defat the contact surface properly. Stick the
clip (2) on the cover belt.
- With the Efka stopmotor, mount the holder (4) on the panel
V820 (5) (if any) using screw and screw on the holder with
the panel to the stand table.
- Assemble the thread stand so that its arms would be parallel
to the longer edge of a table top.
1
2
60mm
3
80
4
5
110
Summary of Contents for 4182i 100 Series
Page 38: ...14 ...
