Minerva Boskovice 4182i 100 Series, Instruction Manual

Page: 6 / 38

2
3. Machine sub-classes and sewing categories
3.1 Sub-class
Table 1
*for only Czech republic
3.2 Sewing categories
This code indication includes the equipment assembled on the machine head, both necessary equipment and optional equip-
ment. The standard configuration of the equipment has been preset, according to the under mentioned table, in the factory which
includes only necessary equipment. If the buyer demands a different configuration then the factory allocates a new code
indication.
Table 2
Standard configuration - the numbers in brackets stand for ordering Nos. when ordering separately the Equipment in question
Type Needle size Top roller Wheel feeder Throat plate Throat plate
insert
Class-sub-class Diameter Pitch of teeth Width of hole
-sewing category 0.01mm mm mm mm -
4180i-1XX-100
80 35 0.4 1.2
(S548 134013) (M 173) (M 060) (M 191)
4180i-1XX-200
100 35 0.4 1.5 (M 091)
(S548 134001) (M 173) (M 060) (M 192)
4180i-1XX-300
130 35 0.6 2.0
(S548 000311) (M 173) (M 059) (M 193)
4. Survey of equipment
This survey does not include the equipment assembled on the stand.
4.1 Equipment (at least one of each from the following group of equipment is assembled)
4.1.1 Needles
M 020 - needle 134 LR size 80
M 023 - needle 134 LR size 100
M 021 - needle 134 LR size 130
4.1.2 Wheel feeders
M 060 - wheel feeder with pitch of teeth 0.4 mm
M 059 - wheel feeder with pitch of teeth 0.6 mm
M 058 - wheel feeder with pitch of teeth 1.2 mm
4.1.3 Top roller holders
M 156 - holder for the top roller
ø
25 mm
M 157 - holder for the top roller
ø
35 mm
M 295 - holder for the top roller
ø
45 mm
•
•
•
•
•
•
•
•
•
•
Type of Top roller lift Reverse stitching Thread
the machine trimmer
Class-subclass Via knee Treadle Via electro- Via electro- Via hand Via electro-
-sewing lever mag. + mag. + lever mag. +
category knee lever treadle hand lever
4182i-111-XXX
4182i-121-XXX*
4182i-147-XXX
4182i-157-XXX*
.