Minerva Boskovice 4182i 100 Series, Instruction Manual

Page: 36 / 38

12
5. Basic setting of stopmotor and position reader
5.1 Generally
The procedure of setting parameters of the stopmotor S359 600045 XXX - EFKA DC 1600/DA82GA on the level of the operator is
described in the first part of the Instruction manual - par. 7.2.1.2 (V810); par. 7.2.2.2 (V820).
A correct function of the sewing machine with drive is attained when changing some parameters of the drive, which are inacces-
sible for the attendance of the machine. Hereinafter there is a description of the possible procesures of changing all parameters.
Procedure of changing parameters of the drive Efka S359 600045 810 - DC 1600/DA82GA; S359 600052 XX - VD 552/6F82FA
and S359 600056 XX - VD 554/6F82FA (panel V 810)
- depress the pushbutton P on panel and switch on thereafter the main switch
- on the display there will appear C 0000 , the 1
st
digit flashes
- using pushbutton + - set the 1
st
digit on the value 3
- depress the pushbutton >> , the 2
nd
digit flashes
- in the same way set the remaining digits in the way to get displayed on the display C 3112 (the number of the code for the
possibility of changing all parameters of the drive)
- depress the pushbutton E , on the display will appear F 200 (parameter number 200 )
- using pushbuttons >>, +, - set the required parameter number and depress the button E
- using pushbuttons +, - set the required parameter value
- depress the pushbutton E (a parameter number following in the sequence will appear) or P (the same parameter number will
appear)
- carry out the termination of changes in depressing the pushbutton P (return to the respective sewing mode)
You will find a detailed information in the original directins for use of the drive.
Note: To get the change of parameters permanently stored, it is necessary, after having changed the parameter, to depress the
pedal in forward direction.
Procedure of changing parameters of the drive Efka S359 600045 820 - DC 1600/DA82GA; S359 600052 XX - VD 552/6F82FA
and S359 600056 XX - VD 554/6F82FA (panel V 820)
- depress the pushbutton P on panel and switch on thereafter the main switch
- on the display there will appear C 0000 , the 1
st
digit flashes
- using pushbuton 0 ÷ 9 set C 3112 on the display (code number for possible changing of all drive parameters)
- depress the pushbutton E , on the display will appear F 200 (parameter number 200 )
- using pushbutton 0 ÷ 9, set the required parameter number and depress the pushbutton E
- using pushbutton +, - , set the required parameter value
- depress the pushbutton E (there will appear further parameter number in the given sequence) or P (return to the given sewing
mode)
- the termination of changes is to be done in depressing the pushbutton P (return to the sewing mode)
A detailed information is in the original directions for use of the drive.
Note.: To get the change of parameters permanently stored, it is necessary, after having changed the parameter, to depress the
pedal in forward direction.
5.2 Stopmotor setting S359 600045 XXX - EFKA DC 1600/DA 82 GA 3312
5.2.1 Setting position reader
- set parameter 170 , Sr1 is shown on the display (reference position)
- depress pushbutton >> , PoS O appears on the display and changing symbol of rotation
- turn the hand wheel until symbol of rotation disappears
- turn the hand wheel to angular value 105
°
of hand wheel ( thread tip is approx. in the level of throat plate)
- depress pushbutton E , changeover to parameter 171
- set parameter 171 , Sr2 is shown on the display (all positions)
- depress pushbutton >>
- 1 XXX is shown on the display (value of first position of needle)
- turn the hand wheel until value XXX begins changing
- turn the hand wheel to the angular value of first position ( 135
°
on the hand wheel respective 30 on the panel)
- depress pushbutton E
- 2 XXX is shown on the display (value of upper position of take-up lever)
- turn the hand wheel until value XXX begins changing
- turn the hand wheel to the angular value of upper position ( 65
°
on the hand wheel respective 450 on the panel)
- depress pushbutton P 2x (return to the sewing mode)
- step shortly treadle down forwards (entry to the memory)