Minerva Boskovice 4182i 100 Series, Instruction Manual

Page: 33 / 38

9
4.7.2 The actual electrical connection
- Stick the clip (1) on wedge (defat the contact surface!).
- Install the power supply cable (2) so that connector (3) is in
the direction of a head. The other connector (connectors) is
(are) connected into terminal box rack of the stop motor
according to the pictographs that are situated on it.
- Install the cable of control panel (4) and connect it to the
terminal box of stop the motor according to the pictographs.
- Pass the cable of position reader through (5) and connect it
to the terminal box of the stopmotor according to the picto-
graphs.
- Install lighting if available and connect its cable (6)to the
cable of transformer.
- Install the earthing cable (7) one end to the hanger (8) and
second end to the holder of stopmotor.
1 5
4
6
7 8
2
3
D
D
Circuit layout
4
2
2
3
3
○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○