80
8.
Function mode
Warning
●
During the Function mode, the instrument suspends measurement.
In due course, even when input of strain gage applied transducer may
change, various kinds of outputs will not change, which may cause
destruction in equipment due to malfunction in peripheral
equipments.
●
When the display is treated as a target of HOLD (F
−
10), the Function
mode can’t be entered with the condition of inputting the HOLD
signal. Before entering Function mode, be sure to cancel the input of
HOLD.
8
−
1. Setting method for function mode
Procedures
1
Press the
key for about one second.
The load display will show “FUNC”.
2
Press the
key. Function mode can be
entered, then the load display will show “F
−
**”,
and the digit of 10
0
will flash on and off.
The last called Function No. is shown at **.
Suspend the setting of Function mode, then press
the
key when returning to the Measurement
mode is required.
3
Select the Function No. desired to set with the
right keys.
Suspend the setting of Function mode, then
Measurement mode can be re
−
entered by
pressing the
key.
It can be increased continuously by the
continuity press of the key.
key
：
Set value carry key
key
：
Set value inclement key
key
：
Set value initialization key
