Minebea Intec Puro, Operating Instructions Manual

Page: 40 / 61

— NO not restored*
— YES enabled
— END Leave menu level
— CAL Initiates a span calibration procedure (zero and
span)
— LIN Initiates a linearity calibration procedure (zero,
mid-point and span)
— GEO Geographical Adjustment Factor (GEO) is used
to adjust the calibration based on the current
location. (Settings from 0 … 31, default 12)
— END Leave menu level
— TYPE show model name
— SER.NUM show serial number
— S.APPLI Application Menu
— OFF Unlock*
— ON Locked
— S.UNIT Unit Menu
— OFF Unlock*
— ON Locked
— S.OP.FUN Operation Function Menu
— OFF Unlock*
— ON Locked
— S.METRO Metrology Menu
— OFF Unlock*
— ON Locked
— S.PRINT Print Menu
— OFF Unlock*
— ON Locked
— S.PR.COM Communication Menu
— OFF Unlock*
— ON Locked
— S.PC.OUT PC Output Menu
— OFF Unlock*
— ON Locked
— S.PC.COM PC Communication Menu
— OFF Unlock*
— ON Locked
— S.CAL.AD Calibration / Adjustment Menu
— OFF Unlock*
6.2.9 Menu Selection [CAL.ADJ]
Enter this menu to perform calibration and adjustment of your scale (see chapter 7 ).
CAL.ADJ
6.2.10 Menu Selection [INFO]
INFO
6.2.11 Menu Selection [SECURE]
Enter this menu to define Security setting (Lock) on menu option to prevent tampering.
Default settings are identified by an "*"
SECURE
Weight indicator Puro® 6 Menu Settings
EN-38 Minebea Intec