6. Put the desired reference quantity on the pan or container and press the
Off
(Yes)
button to store the reference quantity sample.
If there are reference samples put on the pan, the display shows [PW OK] (piece
weight ok) for 2 seconds then [CLR.LIM] (clear limit).
If there are no reference samples put on the pan or the weight is smaller than 2d,
the display shows [REF.ERR] (reference error) briefly.
7.
Press the
Unit
(No) button to use the stored limits and go on at step 18.
8. Press the
Off
(Yes) button to set new limits.
The scale will then display [SET.LOW] (set low limit).
9. Press the
Off
(Yes) button to set the low limit.
The Display will show stored low limit with all digit blinking [000000] (in this
example, 0 pcs).
10. Press the
Unit
(No) button to edit the value.
The first digit is blinking [ _00000].
5 Operation
Weight indicator Puro®
Minebea Intec
EN-23
