2
Safety instructions
2.1
General safety information
NOTICE
Warning of property and/or environmental damage.
The product was in perfect condition with regard to safety features when it left the
factory.
To maintain this condition and to ensure safe operation, the user must follow the
instructions and observe the warnings in this manual.
Follow these safety precautions:
-
The equipment may only be used as intended for weighing tasks.
-
The device may only be opened by authorised personnel.
-
Observe the operating limits of the device.
-
Ensure that the supply voltage at the installation site matches the AC input voltage
indicated on the data label.
-
Avoid shock stress (falling down, hard shocks, falling loads, any impact from the side).
-
Do not use the equipment in hazardous areas and unstable environments.
-
Position the device so that the power plug is freely accessible and the power cord is
not an obstacle or trip hazard.
-
Do not expose the equipment to aggressive chemical vapors or to unnecessarily
extreme temperatures, moisture, or vibration.
-
Unplug the device before you connect or disconnect any electronic peripheral devices
to or from the interface port.
-
Unplug the power cord from the mains supply before cleaning.
-
Make sure that no liquid enters the equipment.
-
Unplug the power cord from the mains supply befory servicing or making internal
connections. The housing may only be opened by authorized and qualified personnel.
2.2
Incoming goods inspection
The shipment must be checked for completeness. A visual inspection must be performed
to determine if the shipment has been damaged. If there are grounds for a complaint, this
must be brought to the attention of the delivery company immediately. A Minebea Intec
sales or service point must be informed. Visit our website http://www.puroscales.com to
get in contact.
2 Safety instructions
Weight indicator Puro®
Minebea Intec
EN-5
