In case the check limit values are wrongly set, [LIM.ERR] (limit error) will be displayed
briefly followed by [CLR.LIM] (clear limit).
The 2nd digit is blinking [0_0.000].
7.
Press the
Unit
button to increase or the
Mode
F
button to decrease the digit value.
The Display will show the low limit value with all digit blinking [001.000] (in this
example, 1.000 kg).
8. Repeat until all the digits are correct.
9. Press the
Off
(Yes) button to accept the low limit value when all digits are blinking
again.
The scale will then display [SET.HI] (set high limit).
10. Same procedure like low limit setting.
The Display will show the high limit value with all digit blinking [001.100] (in this
example, 1.100 kg).
11. Press the
Off
(Yes) button to accept high limit value.
Weight indicator Puro®
5 Operation
EN-20
Minebea Intec
