Minebea Intec Puro, Operating Instructions Manual

Page: 34 / 61

— METRO Metrology (see chapter 6.2.2 )
— UNIT Weighing units (see chapter 6.2.3 )
— OP.FUNC Operation functions (see chapter 6.2.4 )
— PRINT Printer outputs (see chapter 6.2.5 )
— PRN.COM Printer port communication (see chapter 6.2.6 )
— PC.OUT PC output (see chapter 6.2.7 )
— PC.COM PC port communication (see chapter 6.2.8 )
— CAL.ADJ Calibration / Adjustment (see chapter )
— INFO Information (shows serial number and type
designation)(see chapter )
— SECURE Block menu items (see chapter )
— E.N.D. Leave menu
— WEIGH Weighing mode
— OFF disabled
— ON enabled*
— COUNT Count mode
6.2 Menu Navigation
Overview of Menu Mode options.
6.2.1 Menu Selection [APPLIC]
Enter this menu to select application to be used.
Only activated units will be accessible with the
Mode
F
(Mode) Button.
Default settings are identified by an "*"
APPLIC
4. When viewing the setting (in this example [APPLIC] - [WEIGH] - [STAB.RA] value
0.5d), press
Off
(Yes) button to Accept setting or the
Unit
(No) button to change
setting. The current selection is signed by [
⃘
].
5. When [END] is displayed, press
Off
(Yes) button to return to sub-menu selections.
6. Press the
Unit
(No) button to return to the first item in the current menu.
7. Press the
Menu
M
+
button to exit the menu.
Weight indicator Puro® 6 Menu Settings
EN-32 Minebea Intec