Each product contains:
-
Product ID (memory item number)
-
Product name = 12 ASCII characters long. Alphanumeric characters are possible when
using a scanner!
-
Preset tare value
-
Sample weight
-
"Checking" lower limit = a weight value or a number of parts.
-
"Checking" upper limit = a weight value or a number of parts.
If a checking limit is not equal to zero, the "checking" application is activated
automatically. If these limits are zero, "checking" is automatically deactivated.
Example: "Checking" is activated. When a product is loaded that only contains counting
parameters, "checking" is set to [OFF] (deactivated).
If the
key is pressed briefly and the user wants to exit this status (saving or
loading), briefly press the
(Exit) key.
If two scales are defined in the menu, the product can still be loaded even if the scales
have different accuracies. This is the customer’s responsibility.
5.2.8.1
Saving product data
Requirement for saving: The application has already been initialized.
The first product memory has the number 1.
If the entry of the memory number contains an error, e.g. if the memory number is
too big, then [LIM.ERR] is displayed in the "Count" display for approx. 2 seconds.
Count
1.
Briefly press the
key.
Weight
Piece Weight
Count
= the next free product memory number
flashes
The memory number (ID) can be changed using the keyboard or the scanner.
The following is displayed in the displays:
2.
Briefly press the
or
(Yes) key in order to save the product parameters.
Compact scale Puro® LargeCount
5 Operating
EN-34
Minebea Intec
