— ON
Legal metrology mode is activated
— LOCK.SW
Display status of the locking switch for both
scales
— OPEN
Switch is open
— CLOSED
Switch is closed
— END
Exit menu level
— S.METRO
Metrology menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.UNIT
Unit menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.OP.FUN
Operating functions menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.PRINT
Print menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.PR.COM
Print communication menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.PC.OUT
PC output menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.PC.COM
PC communication menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.CAL.AD
Calibration menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— S.ADC.CO
ADC menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— RESET
Restore factory setting of the current menu
— OFF
Menu item can be changed*
— ON
Lock menu item
— END
Exit menu level
5.3.4.11
[SECURE] menu selection
The safety setting (lock) for menu access can be defined via this menu in order to prevent
unauthorized interventions.
Factory settings are marked with "*"
SECURE
5.4
Calibration, adjustment
5.4.1
Calibration
The calibration takes place following activation of menu item [WP1] or [WP2] in the menu.
Weights for calibration points can be freely selected when the value is flashing.
If the unit used for normal weighing is pounds, the calibration unit is also lb (pound).
Compact scale Puro® LargeCount
5 Operating
EN-54
Minebea Intec
