The battery must be charged in a dry environment. For a maximum operating time, the
battery should be charged at room temperature.
During battery operation, the battery icon displays the battery’s remaining charge status.
The display switches off automatically when the batteries are empty.
Icon
Charge status
0 to 10% remaining
11 to 40% remaining
41 to 70% remaining
71 to 100% remaining
Note:
If the battery icon flashes rapidly, then there is around 30 minutes of working time left.
When [lo.bat] is displayed, the scale switches off.
WARNING
Danger of explosion
If the rechargeable battery is replaced with a battery of the wrong type, or if it is not
connected correctly, then there is a danger of explosion.
The battery may only be replaced with the same type by an authorized Puro®
service dealer.
The battery must be disposed of according to the locally valid laws and regulations.
If the hardware does not recognize a connected rechargeable battery, the following
applies:
Rechargeable battery USB-C cable
LED display charging
Display icon
Battery not full
Connect
Red
No icon
Battery full
Connect
Green
No icon
No battery installed
Connect
Red
No icon
Battery not full
Disconnect
Switched off
Charge status of
the battery
Battery full
Disconnect
Switched off
Battery full
3.2.2
Connecting a printer
A printer can be connected via the printer port on the underside of the device.
Compact scale Puro® LargeCount
3 Device installation
EN-10
Minebea Intec
