If a weight or a number of parts has been adopted into the totalizing memory, the total
symbol flashes until the weight is removed from the weighing pan and the weight is < 2 d.
A new totalizing process can only be started if the load has previously been removed from
the weighing pan.
If two weighing platforms are connected, the displayed weights are totalized accurately
according to the display. Example: The first element in the totalizing memory is taken
from WP1 and the second is taken from WP2:
1.003 kg
// WP1 with accuracy 1 g
= 5.15 kg
// WP2 with accuracy 50 g
= 6.153 kg
// total = totalizing memory
It is also possible to totalize negative weight values (deduction mode). Place weights on
the weighing pan, press the
(Tare) key. Remove the first weight. Add to the
totalizing memory. Press the
(Tare) key again. Then remove the second weight. Add
to the totalizing memory.
5.2.5.2.1
Manual mode
Stable weights ≥ 2 d can be totalized by briefly pressing the
key. This also applies
for a number of parts if there is stability.
The next weight/the next quantity can be totalized if the load had previously been
removed from the scale.
5.2.5.2.2
Automatic mode
Stable weights ≥ 2 d are automatically totalized if the load had previously been removed
from the scale. This also applies for a quantity if there is stability.
5.2.5.2.3
Printouts
Min, Max is only printed if "All" is selected as print content in the menu [PRINT]-
[CONTNT]- [TOTAL].
Weights as parameters (= weight total printout):
Printout
Description
N: 2
TOTAL: 1.955 g
MAX: 1.485 g
MIN: 0.470 g
Number of items, here: 2
Totalized value
Maximum value
Minimum value
Parts as parameters (= parts and weight total printout)
Printout
Description
N: 25
TOTAL: 148 g
124 pcs
MAX: 20 g
10 pcs
MIN: 4 g
2 pcs
Number of items, here: 25
Totalized value of the weights
Totalized value of the parts
Maximum value as weight
Maximum value as number of parts
Minimum value as weight
Minimum value as quantity
5 Operating
Compact scale Puro® LargeCount
Minebea Intec
EN-31
