2
Safety instructions
2.1
General information
-
The device may only be used as intended for weighing tasks.
-
Observe the operating limits of the device.
-
Do not apply loads that exceed the capacity of the scale.
-
Before connecting or disconnecting electronic peripheral devices, disconnect the
device from the mains or from the data interface.
-
Unplug the power cord from the mains supply before cleaning.
-
Unplug the power cord from the mains supply before maintenance; only establish
internal connections when disconnected from the power supply.
-
Make sure that no liquid enters the device.
2.2
Incoming goods inspection
Check the contents of the consignment for integrity. Check the contents visually to
determine whether any damage has occurred during transport. If there are grounds for
rejection of the goods, a claim must be filed with the carrier immediately. A Minebea Intec
sales or service organization must also be notified. Visit our website
http://www.puroscales.com or contact your dealer.
2.3
Before operational startup
NOTICE
Perform visual inspection.
Before operational startup as well as after storage or transport, inspect the product
visually for signs of mechanical damage.
The product should not be put into operation if it displays signs of visible damage
and/or is defective.
2.3.1
Danger of explosion
Do not use the device in hazardous areas.
2.3.2
IP protection
The indicator fulfills protection grade IP43.
The load cells fulfill protection grade IP67.
2 Safety instructions
Floor scale Puro®
Minebea Intec
EN-5
