[SET.HI] (specify upper limit) is displayed in the display.
8. Press the
Off
(Yes) key to enter the lower limit.
The saved lower limit is displayed using flashing digits in the display: [000000]
(in this example 0 items).
9. Press the
Unit
(No) key to change the value.
The first digit flashes: [ _00000].
10. Enter the value for the lower limit: Press the
Unit
key in order to increase the value.
Press the
Mode
F
key in order to decrease the value. To move to the next digit, press
the
Off
(Yes) key; to go to the previous digit, press the
Menu
M
+
(End) key.
The value for the lower limit is displayed using flashing digits in the display:
[000500] (here 500 parts).
11. Press the
Off
(Yes) key to confirm the value for the lower limit.
12. Enter the value for the upper limit. (Procedure as in steps 5 to 10)
The value for the upper limit is displayed using flashing digits in the display:
[00510.0] (here 510 parts).
Floor scale Puro®
5 Operating
EN-26
Minebea Intec
