— NO
not reset*
— YES
activated
— END
Exit menu level
— STAB.RA
Stability range
— 0.5d
1/2 d
— 1d
1 d*
— 2d
2 d
— 4d
4 d
— FILTER
Adjustment filter
— LOW
Lower accuracy, short stabilization time
— MED
Normal accuracy, average stabilization time*
— HI
High accuracy, long stabilization time
— A.ZERO.T
Automatic zero point correction
— OFF
Switching off
— 0.5d
Drift up to 1/2 d*
— 1d
Drift up to 1 d
— 3d
Drift up to 3 d
— AUT.OFF
Counter for automatic switching off
— OFF
Switching off*
— 1 MIN
Switching off after 1 minute with no activity
— 5 MIN
Switching off after 5 minutes with no activity
— 10 MIN
Switching off after 10 minutes with no activity
— DYN.TIM
No effect in this device
— 5 SEC
No effect in this device
— 10 SEC
No effect in this device
— 15 SEC
No effect in this device
— 20 SEC
No effect in this device
— 25 SEC
No effect in this device
— 30 SEC
No effect in this device
— RESET
Factory settings
— NO
not reset*
— YES
activated
— END
Exit menu level
— kg
Kilogram
— OFF
deactivated
— ON
activated*
— g
Gram
— OFF
deactivated
— ON
activated*
— lb
Pound
5.3.2.2
[METRO] menu selection
The functions of the displays and scales can be adjusted in this menu.
Factory settings are marked with "*"
METRO
5.3.2.3
[UNIT] menu selection
The weight unit can be selected in this menu.
Only activated units can be called up using the
Unit
(unit) key.
Factory settings are marked with "*"
UNIT
5 Operating
Floor scale Puro®
Minebea Intec
EN-35
