Minebea Intec Puro EF-4P, Operating Instructions Manual

Page: 40 / 66

— AUTO Switches on when a key is pressed or the
displayed weight changes*
— COM.EQU Communication module
— OFF deactivated*
— BLUE.TH Bluetooth activated (if the Bluetooth module is
installed)
— WIFI WiFi activated (if the WiFi module is installed)
— ETHER.N Ethernet activated (if the Ethernet module is
installed)
— RESET Factory settings
— NO not reset*
— YES activated
— END Exit menu level
— STABLE Print criteria
— OFF Values are printed immediately
— ON Values are only printed if they are stable*
— A.PRINT Automatic printout
— OFF deactivated*
— ON.STAB printing on stability
— INTER Printing in the specified interval
— 1…3600 1 … 3,600 seconds
— CONT Print continuously
— ACCEPT Printing on stability and within the tolerance
limits
— CONTNT Content of a printout
— RESULT Displayed value
— OFF deactivated
— ON activated*
— GROSS Gross value
— OFF deactivated*
— ON activated
— NET Net value
— OFF deactivated*
— ON activated
— TARE Tare
— OFF deactivated*
— ON activated
— HEADER Header
— OFF deactivated*
— ON activated
— FOOTER Info on the footer
— OFF deactivated*
— ON activated
— MODE Info on the application mode
— OFF deactivated*
— ON activated
5.3.2.5 [PRINT] menu selection
Scale parameters can be printed in this menu.
Factory settings are marked with "*"
PRINT
5 Operating Floor scale Puro®
Minebea Intec EN-37