3
Device installation
3.1
Mechanical preparation
3.1.1
Ambient conditions
-
Only use within buildings.
-
Operating temperature: -10°C to +40°C
-
Storage temperature: -20°C to +50°C
-
Relative humidity: 20% to 85%, non-condensing
-
Altitude: up to 3,575 m
3.1.2
Installation location
-
Place the device on a stable, flat surface.
-
Position the device so that the power plug is freely accessible and the power cord
does not present an obstacle or trip hazard.
Avoid unsuitable influences at the installation location:
-
Extreme temperatures and excessive temperature fluctuations
-
Heat due to proximity to heaters or due to direct sunlight
-
Aggressive chemical vapors
-
Extreme moisture
-
Extreme vibrations
3.1.2.1
Shock resistance
NOTICE
Falling objects, side impacts, and shock loads may affect the performance and the
accuracy of the scale and damage the platform.
Avoid shock loads!
3.1.3
Unpacking
The following applies for devices from a platform size of 60 x 80 cm:
.
Wear protective clothing (safety shoes and, if necessary, gloves)
.
When lifting or transporting the weighing platform, always lift it by its longest sides.
3 Device installation
Floor scale Puro®
Minebea Intec
EN-7
