manualshive.com logo in svg

Minebea Intec Puro EF-4P, Operating Instructions Manual, Page: 49 / 66

Share
Download
Minebea Intec Puro EF-4P Operating Instructions Manual Download Page 49

If an error occurs during the linearization, [CALE] (calibration error) is displayed and
the process is canceled.

5.4.3

[GEO] geographic data (calibration location)

The adjustment of the calibration based on the current location is carried out using the
geographic adjustment factor [GEO]. (Settings from 0 … 31 are available.) The table under

5.4.4

contains the GEO values for a wide range of latitudes.

Call up the menu mode:

Release the key.

In the display, the value of the linearization weight at 100% of the capacity of the
scale is displayed [00150.0] (in this example 150 kg).

[--C--] is displayed while the value is being saved.

13. Remove the weight.

The scale is ready for operation.

1.

Press and hold

Menu

M

+

until [M.E.N.U] (menu) is displayed.

The first menu item [APPLIC] (application) is shown in the display.

Floor scale Puro®

5 Operating

EN-46

Minebea Intec

Summary of Contents for Puro EF-4P



































































Reviews:

No comments