Mindray VS-800 Service Manual Download Page 7

Page: 7 / 74

Safety Precautions

1 . Meaning of Signal Words

In this manual, the signal words

DANGER

WARNING

, and

CAUTION

are used

regarding safety and other important instructions. The signal words and their meanings are

defined as follows. Please understand their meanings clearly before reading this manual.

Signal word

Meaning

DANGER

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided,
may result in property damage.

2 . Meaning of Safety Symbols

Symbol Description

Type-BF applied part

"Attention" (Refer to the operation manual.)

3 .

Safety Precautions

Please observe the following precautions to ensure the safety of service engineers as well as

operators when using this system.

DANGER:

Do not use flammable gasses such as anesthetics, or flammable

liquids such as ethanol, near this product, because there is danger

of explosion.

Summary of Contents for VS-800











































































Search results

Summary of Contents for VS-800

Reviews:

Related manuals for VS-800

Brands by name

Popular brands

Mindray VS-800, Service Manual

Search results

Summary of Contents for VS-800

Reviews:

Related manuals for VS-800

Brands by name

Popular brands