Mindray BeneVision N19, Service Manual

Page: 49 / 105

BeneVision N22/BeneVision N19 Patient Monitor Service Manual 3-23
3.11 Mounting Check
Tools required: None.
3.11.1 Safety check
Check the mounting of Patient Monitor is safe.
3.11.2 Overall Test and Check of Installed System
Implement installation test:
The following tests and checks need to be performed after a patient monitor is installed, or reinstalled after being
disassembled and repaired:
 The following tests and checks need to be performed after a patient monitor is installed, or reinstalled after being
disassembled and repaired:
 Check that the screws fastening the bracket and guide rail are not loose.
 Check that the four installation screws on the rear side of the main unit are not loose.

Check that the main unit and the VESA metal plate are closely attached.
 Check that the connection between stand and bracket is not loose.
 Check that the screws at the installation support leg for fixing fast lock are not loose.
 Check that the fast lock or lock plug at the rear side of the module rack is not loose.
 Check that the modules can be normally and securely inserted into the module rack.
 Check that the trim strip is properly installed after the display is disassembled and repaired.
 Check that the display handle is not loose.
 Check that the length of display wire allows for flexible turn of the display and angle adjustment of the monitor.

Check that the monitor can be placed at any angle as required.
 Check that the VHM bracket can place the monitor at any height as required.
 Check that the screws on the rotation part of the display are securely installed, and that the damping force is
properly set.