These guidelines do
NOT
replace the instructions for use and all users should refer to the appropriate
Operator’s Manual
for detailed instructions.
The Illustrations may not necessarily reflect the setup or data displayed on your device.
BeneHeart R3 Clinical Education Pack SWL 02.07_V1 Mindray UK © 2020. Errors and omissions excepted. Subject to change.
Mindray® is a registered trademark of Shenzhen Mindray Bio-Medical Electronics Co. Ltd.
24
Cleaning and Disinfecting
Keep your equipment and accessories free of dust and dirt. To avoid damage to the equipment, follow
these rules:
•
Always dilute the cleaning and disinfecting agent according to the manufacturer’s instructions or
use lowest possible concentration.
•
Do not immerse any part of the equipment into liquid.
•
Do not pour liquid onto the equipment or accessories.
•
Do not allow liquid to enter the case.
•
Never use abrasive materials (such as steel wool or silver polish), or erosive cleaners (such as
acetone or acetone-based cleaners).
Recommended cleaning agents for the equipment are:
Sodium hypochlorite bleach (diluted)
Hydrogen peroxide (3%)
Ethanol (75%)
Isopropanol (70%)
For the recommended cleaning agents for the reusable accessories, refer to the instructions for use
delivered with the accessories.
Cleaning the Equipment
Your equipment should be cleaned on a regular basis. Before cleaning the equipment, consult your
hospital’s regulations.
Cleaning the BeneHeart R3 Device
1.
Shut down the equipment and disconnect the power cord, accessories, and other devices that are
connected to the equipment.
2.
Clean the display screen using a soft, clean cloth dampened with a glass cleaner.
3.
Clean the exterior surface of the equipment using a soft cloth dampened with the cleaning agent.
4.
Wipe off excess moisture with a dry cloth.
5.
Dry your equipment in a ventilated, cool place.
Cleaning Patient Cables and Lead Wires
1.
Remove cable and lead wires from the equipment before cleaning.
2.
Gently wipe the cables and lead wires with a soft cloth dampened with ethanol, avoiding the
metal connectors.
3.
Wipe off excess moisture with a dry cloth.
4.
Dry the cables and lead wires in a ventilated, cool place.
Section 15
Care & Maintenance
